Installing iBook G3 14" Airport Card

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x

Install an original Airport 802.11b card internally.

Sections
Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Airport Card  ¶ 

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

  • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

first image

Add Note Edit Step 3  ¶ 

  • If your computer does not have an Airport card installed, skip to the RAM shield removal step.

  • Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield.

Next » « Previous

Required Tools

Flathead 3/32" or 2.5 mm Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 16 in stock

Related Products

Airport Card

$49.95

Notes Add Note Notes are offturn on