first image

Add Note Step 25

  • Turn over the computer and open it.

  • Pry up the magnet covering a Phillips screw near the middle of the computer.

first image

Add Note Step 26

  • Remove the following 4 screws on the edges of the keyboard area.

    • One 4.5 mm Phillips underneath where the magnet was.

    • Three 6 mm Phillips in plastic depressions.

first image

Add Note Step 27

  • Peel up the foil tape covering the speaker cable near the ports.

Add NoteNotes: Step 26

tir38's avatar
Flag Reply by tir38 Jul 23 @ 8:36 PM

the three 6mm screws may require more torque than previous screws.