first image

Add Note Edit Step 49  ¶ 

  • Remove the single 5.5 mm Phillips screw securing the DC-In board to the metal framework.

first image

Add Note Edit Step 50  ¶ 

  • Peel up the DC-In cable from the bottom of the metal framework and pull it through the conveniently-located nearby hole.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the iBook G3 12" device page.

Did you successfully follow this guide?

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 48 in stock

Spudger

$2.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Flathead 3/32" or 2.5 mm Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 16 in stock

Related Products

iBook G3 12" DC-In Board

$24.95 · 4 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 13 in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on