Installing PowerBook G4 Titanium Onyx Logic Board

  • Author: iRobot
  • Difficulty: Difficult
  • Add Note x
  • x 5

The motherboard - which includes all ports and the DC-In board - is fairly easy to change.

Sections
Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Keyboard  ¶ 

  • Remove the battery.

  • Turn the keyboard locking screw so that it is parallel to the space bar.

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

first image

Add Note Edit Step 2  ¶ 

  • Rest the keyboard face down on the trackpad area.

  • Disconnect the keyboard connector from the logic board.

first image

Add Note Edit Step 3  ¶ 

  • Your laptop should look approximately like this.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 48 in stock

5mm Nut Driver

$9.95 · 12 in stock

Related Products

G4 Titanium Onyx 667 MHz Logic Board (VGA)

$299.95 · 3 in stock

G4 Titanium Onyx 550 MHz Logic Board

$249.95 · 3 in stock

Notes Add Note Notes are offturn on