first image

Add Note Edit Step 13 — DVD Drive  ¶ 

  • Before continuing, place a soft cloth on your work surface to rest the computer on. Turn the G4 over, making sure the DVD drive doesn't fall out.

  • Carefully peel the adhesive strip away from the DVD drive. The plastic dust shield covering the DVD drive is easily damaged. Try to start at the four corners and work toward the center.

first image

Add Note Edit Step 14  ¶ 

  • Bend the silver metal EMI clip so that it is vertical. This part may fall out after removing the DVD drive.

  • The EMI clip is not essential for reassembling the computer. If the clip falls out, don't worry about putting it back in.

first image

Add Note Edit Step 15  ¶ 

  • Turn the G4 over.

  • Disconnect both orange ribbon cables from the logic board using a spudger or the tip of your finger.

Next » « Previous

Required Tools

Phillips #0 Screwdriver

$4.95 · 50+ in stock

T8 Torx Security Bit Screwdriver

$6.95 · 47 in stock

5mm Nut Driver

$9.95 · 12 in stock

Related Products

G4 Titanium Mercury 500 MHz Logic Board

$299.95

G4 Titanium Mercury 400 MHz Logic Board

$249.95

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on