Installing PowerBook G4 Titanium Mercury Logic Board
Steps 1–3: Keyboard
Step 4: RAM
Steps 5–7: Lower Case
Step 8: Airport Card
Steps 9–12: Hard Drive
Steps 13–16: DVD Drive
Steps 17–19: Modem
Steps 20–25: Logic Board
Related parts
G4 Titanium Mercury 400 MHz Logic Board
$249.95 · 2 in stock
Related tools
T8 Torx Screwdriver
$4.95 · 109 in stock
Phillips #0 Screwdriver
$4.95 · 81 in stock
5mm Nut Driver
$4.95 · 156 in stock
Popular Repair Guides
Installing PowerBook G4 Titanium Mercury Logic Board
Introduction
| Difficulty: | Difficult |
|---|
The motherboard - which includes all ports and the DC-In board - is fairly easy to change.
Tools used in this guide
Parts relevant to this guide
Step 1 — Keyboard
Remove the battery.
Turn the keyboard locking screw so that it is parallel to the space bar.
Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
Step 2
Rest the keyboard face down on the trackpad area.
Disconnect the keyboard connector from the logic board.
Step 3
Your laptop should look approximately like this.
Notes
There are no notes