Installing PowerBook G4 Titanium Mercury Hard Drive

Add Note Introduction

How to remove the hard drive, along with its cable and bracket from your computer.

Tools used in this guide
Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Lower Case

  • Turn the G4 over.

  • Remove the eight Phillips screws from the lower case.

first image

Add Note Step 2

  • Using your thumbs, slide the lower case away from you.

  • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

first image

Add Note Step 3

  • Your laptop should look approximately like this.

Notes

There are no notes