Installing PowerBook G4 Aluminum 17" 1-1.67 GHz RAM

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x
  • x 8

Two RAM slots allow up to 1 GB of PC2700 RAM.

Sections
Files
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Orient the computer so that the side with the line of screws on it is away from you.

  • Use your thumbs to push both battery release tabs away so that the edge of the battery lifts up.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — RAM  ¶ 

  • Remove the three identical Phillips screws from the memory door.

first image

Add Note Edit Step 3  ¶ 

  • Lift the memory door up enough so that you can get a grip on it, and slide it toward you, pulling it away from the casing.

first image

Add Note Edit Step 4  ¶ 

  • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • Pull the chip directly out from its connectors. If there is a second RAM chip installed, pop it out in the same manner.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 17" 1-1.67 GHz device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on