Installing PowerBook G4 Aluminum 17" 1-1.67 GHz Display

Add Note Introduction

Change out the entire display assembly, including the inverter, Airport antenna, hinges and metal casing.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Orient the computer so that the side with the line of screws on it is away from you.

  • Use your thumbs to push both battery release tabs away so that the edge of the battery lifts up.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — Upper Case

  • Remove the three identical Phillips screws from the memory door.

first image

Add Note Step 3

  • Lift the memory door up enough so that you can get a grip on it, and slide it toward you, pulling it away from the casing.

Notes

There are no notes