Installing PowerBook G4 Aluminum 17" 1-1.67 GHz Airport Extreme
Step 1: Battery
Steps 2–11: Upper Case
Steps 12–14: Modem
Steps 15–19: PC Card Cage
Steps 20–21: Airport Extreme
Related tools
Spudger
$2.95 · 1540 in stock
Phillips #00 Screwdriver
$4.95 · 145 in stock
4mm Nut Driver
$4.95 · 8 in stock
T8 Torx Screwdriver
$4.95 · 109 in stock
Popular Repair Guides
Installing PowerBook G4 Aluminum 17" 1-1.67 GHz Airport Extreme
Introduction
| Difficulty: | Moderate |
|---|
Install an Airport Extreme 802.11g card internally.
Tools used in this guide
Parts relevant to this guide
Step 1 — Battery
Orient the computer so that the side with the line of screws on it is away from you.
Use your thumbs to push both battery release tabs away so that the edge of the battery lifts up.
Lift the battery out of the computer.
Step 2 — Upper Case
Remove the three identical Phillips screws from the memory door.
Step 3
Lift the memory door up enough so that you can get a grip on it, and slide it toward you, pulling it away from the casing.
Notes
There are no notes