first image

Add Note Step 31

  • Lift the Airport card out of the computer and slide a spudger between the card and the antenna connector to disconnect the cable from the card.

  • Deroute the antenna cable from the side of the card, removing tape as necessary.

  • You don't need to remove the Airport card entirely. We're just trying to free up the Airport antenna cable.

first image

Add Note Step 32

  • Using a spudger, pry up the Bluetooth board from the cavity in front of the battery compartment.

first image

Add Note Step 33

  • Disconnect the Bluetooth antenna cable from the Bluetooth board.

Notes

There are no notes