Installing PowerBook G4 Aluminum 15" 1-1.5 GHz Keyboard

  • Author: iRobot
  • Difficulty: Difficult
  • Add Note x
  • x 11

This guide shows the hidden screws you must remove when replacing the keyboard.

Sections
Files
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Upper Case  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Remove the following 8 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Two 9 mm Phillips on either side of the memory compartment.

    • Four 16 mm Phillips along the hinge.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 16 in stock

Related Products

G4 Aluminum 15" 1/1.25/1.33/1.5 GHz Keyboard (Non-backlit)

$99.95 · 5 in stock

G4 Aluminum 15" 1/1.25/1.33/1.5 GHz Keyboard (Backlit)

$99.95 · 4 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 38 in stock

Anti-Static Wrist Strap

$7.95 · 17 in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on