View profile
Logout
« Previous
Next »
Page 7 of 8
Pull the Airport ribbon cable up in order to access the black Airport antenna connector.
Disconnect the Airport antenna cable at the black connector, making sure you pull only on the black rubber portion of the connector.
Disconnect the inverter cable from the logic board.
Remove the two pieces of orange tape covering the display data cable and disconnect the cable from the logic board.
Next » « Previous
$6.95 · 47 in stock
$2.95 · 50+ in stock
$4.95 · 50+ in stock
$2.95 · 16 in stock
$399.95 · 2 in stock
$24.95 · 50+ in stock
$7.95 · 50+ in stock
$59.95 · 50+ in stock
$6.95 · 50+ in stock
1024
Notes are offturn on