first image

Add Note Step 43

  • Remove the T8 Torx screw from the RJ-11 board.

  • Remove the 5 mm standoff that secures the DC/Sound card to the lower case using a nut driver or pliers.

first image

Add Note Step 44

  • Do not pull the DC/Sound card out entirely. You will be disconnecting the Bluetooth cable in the next step.

  • Lift the DC/Sound card out of the computer and turn it over.

first image

Add Note Step 45

  • Disconnect the Bluetooth cable from the DC/Sound card, removing tape as necessary.

Notes

There are no notes