Step 1: Battery
Steps 2–14: Upper Case
Steps 15–24: Display
Steps 25–33: Logic Board
Steps 34–37: Speakers
Steps 38–39: PC Card Cage
Steps 40–41: Heat Sink
Steps 42–46: DC & Sound Card
Related parts
G4 Aluminum 15" 1/1.25 GHz DC & Sound Card
$99.95 · 5 in stock
G4 Aluminum 15" 1.33/1.5 GHz DC & Sound Card
$99.95 · 5 in stock
Related tools
Spudger
$2.95 · 919 in stock
Phillips #00 Screwdriver
$4.95 · 481 in stock
T6 Torx Screwdriver
$4.95 · 104 in stock
T8 Torx Screwdriver
$4.95 · 74 in stock
4mm Nut Driver
$4.95 · 22 in stock
5mm Nut Driver
$4.95 · 165 in stock
Anti-Static Wrist Strap
$2.95 · 103 in stock
Popular Repair Guides
Step 34
—
Speakers
On computers with an ambient light sensor, you will remove an ambient light sensor board instead of a placeholder yellow plastic board.
Remove the two black Phillips screws from the yellow plastic board above the USB port on the left side of the computer.
Step 35
Remove the black Phillips screw on the bottom corner of the left speaker board.
Step 36
Remove the nut from the screw just in front of the left speaker.
Use 4mm nut driver