Installing PowerBook G4 Aluminum 15" 1-1.5 GHz DC & Sound Card

Add NoteIntroduction

This unit provides power to the machine, allows the battery to charge, and provides sound capability.

first image

Add NoteStep 1 — Battery 

  • Use a coin or flathead screwdriver to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add NoteStep 2 — Upper Case 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add NoteStep 3

  • Remove the following 8 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Two 9 mm Phillips on either side of the memory compartment.

    • Four 16 mm Phillips along the hinge.

Notes

There are no notes