Installing PowerBook G4 Aluminum 15" 1-1.5 GHz Airport Extreme Card

Add Note Introduction

Install an Airport Extreme 802.11g card internally.

Tools used in this guide
Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — Airport Extreme Card

  • Flip down the door on the right side of the battery compartment.

first image

Add Note Step 3

  • Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.

Notes

There are no notes