Installing PowerBook G4 Aluminum 12" 867 MHz Sleep Light

Add Note Introduction

Replacing the pulsing white LED sleep indicator.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — EMI Finger

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Step 3

  • Remove the long black Phillips screw next to the memory card.

  • Remove the small EMI finger beneath the black screw.

Notes

There are no notes