Installing PowerBook G4 Aluminum 12" 867 MHz EMI Finger

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x
  • x 3

Small metal finger located beneath the memory door.

Sections
Files
Tools
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — EMI Finger  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Remove the long black Phillips screw next to the memory card.

  • Remove the small EMI finger beneath the black screw.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 12" 867 MHz device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on