Installing PowerBook G4 Aluminum 12" 867 MHz Airport Extreme Card

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x
  • x 8

Install an Airport Extreme 802.11g card internally.

Sections
Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Airport Extreme Card  ¶ 

  • Flip down the door on the right side of the battery compartment.

first image

Add Note Edit Step 3  ¶ 

  • Use a spudger to disconnect the Airport antenna from the card.

first image

Add Note Edit Step 4  ¶ 

  • Grasp the plastic tab and pull the card out all the way.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 12" 867 MHz device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on