Installing PowerBook G4 Aluminum 12" 1-1.5 GHz RAM

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x
  • x 24

One RAM slots allow up to 1.25 GB of PC2700 RAM.

first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — RAM  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • Pull the chip directly out from its connectors.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 12" 1-1.5 GHz device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on