first image

Add Note Step 4 — Airport Extreme Card

  • Flip down the door on the right side of the battery compartment.

first image

Add Note Step 5

  • Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.

first image

Add Note Step 6

  • Grasp the plastic tab and pull the card out all the way.

Add NoteNotes: Step 5

jerrykrinock's avatar
Flag Reply by jerrykrinock Jun 13 @ 7:05 AM

Note that this is a "right angle" coaxial connector. The metal cube is a part of the connector and stays with the cable. It is not a part of the airpor card. Also, I found two clear plastic blocks in front of the airport card, a smaller one near the connector and a larger one on the other side. Possibly these are to keep the cable from vibrating and flexing during, say, a truck ride. Don't lose these.