Installing PowerBook G4 Aluminum 12" 1-1.5 GHz EMI Finger

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x

Small metal finger located beneath the memory door.

Sections
Files
Tools
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — EMI Finger  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Remove the long black Phillips screw next to the memory card.

  • Remove the small EMI finger beneath the black screw.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Aluminum 12" 1-1.5 GHz device page.

Did you successfully follow this guide?

This guide has been completed 1 time.

Comments Add Note Comments are offturn on