first image

Add Note Edit Step 4 — Heat Shield  ¶ 

  • Remove the two silver Phillips #1 screws that attach the heat shield to the internal metal framework.

  • Lift the heat shield up and pull it toward you.

first image

Add Note Edit Step 5  ¶ 

  • Your laptop should look approximately like this.

first image

Add Note Edit Step 6 — Airport Card  ¶ 

  • Skip this step if your computer does not have an Airport card installed.

  • Firmly grasp the plastic tab attached to the Airport card and pull up and then to the right.

  • The Airport card is still attached to the antenna cable, so don't just yank it out of the slot.

Next » « Previous

Required Tools

Phillips #0 Screwdriver

$4.95 · 50+ in stock

T8 Torx Security Bit Screwdriver

$6.95 · 50 in stock

Anti-Static Wrist Strap

$7.95 · 13 in stock

Spudger

$2.95 · 50+ in stock

Related Products

G3 Pismo Power Card

$39.95 · 2 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 13 in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on