Installing PowerBook G3 Pismo Optical Drive

Add Note Introduction

It's easy to change or upgrade the optical drive mechanism to a combo or SuperDrive.

Tools used in this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Optical Drive

  • Use the lever at the front of your laptop to remove the optical drive bay from the computer.

  • Remove the 2 Phillips #00 screws from the left side of the optical drive housing.

  • These screws are longer than those on the other side.

first image

Add Note Step 2

  • Remove the 2 Phillips #00 screws from the other side.

first image

Add Note Step 3

  • Grasp the black drive housing in one hand and the drive itself in the other, then slide the two apart.

  • If you have a CD or any other object jammed in your optical drive, we have an optical drive repair guide.

Congratulations!

Share your repair story!

  

To reassemble your device, follow these instructions in reverse order. For more information, check out the PowerBook G3 Pismo device page.

Did you successfully follow this guide?

Notes

There are no notes