Installing PowerBook G3 Lombard RAM

Add Note Introduction

Two RAM slots allow up to 512 MB of PC100 RAM.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Keyboard

  • Turn the computer so that the ports are facing you.

  • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

first image

Add Note Step 2

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

first image

Add Note Step 3

  • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

  • In order to replace the keyboard, you must first remove the modem.

Notes

There are no notes