Installing PowerBook G3 Lombard Processor

Add Note Introduction

This processor board also includes L2 cache. It is not soldered to the logic board, so installing a replacement is very easy.

Paginated Single Page Steps

first image

Add Note Step 1 — Keyboard

  • Turn the computer so that the ports are facing you.

  • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

first image

Add Note Step 2

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

first image

Add Note Step 3

  • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

  • In order to replace the keyboard, you must first remove the modem.

Notes

There are no notes