View profile
Logout
« Previous
Next »
Page 2 of 5
Remove the following eight screws securing the lower case to the chassis:
One 3 mm Phillips screw.
Three 13.5 mm Phillips screws.
Four 3.5 mm Phillips screws.
Using both hands, lift and remove the lower case off the upper case.
Disconnect the camera cable by pulling the male end straight away from its socket.
Make sure to pull the connector straight away and not straight up from its socket.
Next » « Previous
$2.95 · 50+ in stock
$4.95 · 50+ in stock
$499.95 · 1 in stock
$24.95 · 50+ in stock
$7.95 · 50+ in stock
$59.95 · 50+ in stock
$6.95 · 50+ in stock
1024
Notes are offturn on