Installing MacBook Unibody Model A1278 Battery

  • Add Note x
  • x 15

Replacing the battery on a MacBook Unibody is an easy task.

Sections
Relevant parts
first image

Add Note Edit Step 1 — Access Door  ¶ 

  • With the case closed, place the Unibody top-side down on a flat surface.

  • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

first image

Add Note Edit Step 2  ¶ 

  • The access door should now be raised enough to lift it up and out of the Unibody.

first image

Add Note Edit Step 3 — Battery  ¶ 

  • Be sure the access door release latch is vertical before proceeding.

  • Grab the white plastic tab and pull the battery up and out of the Unibody.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Unibody Model A1278 device page.

Did you successfully follow this guide?

Related Products

MacBook Unibody (Model No. A1278) Battery

$109.95 · 6 in stock

Notes Add Note Notes are offturn on