Installing MacBook Pro 17" Models A1151 A1212 A1229 and A1261 AirPort Extreme

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x
  • x 3

Install an AirPort Extreme 802.11g card internally.

Sections
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use your fingers to push both battery release tabs away from the battery and lift the battery out of the computer.

first image

Add Note Edit Step 2 — RAM Shield  ¶ 

  • Remove the four identical Phillips screws from the memory door.

first image

Add Note Edit Step 3  ¶ 

  • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Related Products

MacBook 802.11g Airport Extreme Card

$79.95 · 10 in stock

MacBook 802.11n Airport Extreme Card

$89.95 · 37 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on