first image

Add Note Step 10

  • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

  • Remove the upper case.

first image

Add Note Step 11 — Left Fan

  • Disconnect the iSight, inverter, and left fan cables from the logic board.

first image

Add Note Step 12

  • Use a spudger to flip up the brown plastic flap securing the left ambient light sensor cable to the logic board.

  • Slide the left ambient light sensor cable to the left and out of its connector.

Add NoteNotes: Step 10

urdus's avatar
Flag Reply by urdus Oct 27 @ 9:27 AM

not necessary. just attach a string around both the screen and the keyboard. it will stay in a steady position..

-urdus.