first image

Add Note Step 13

  • Remove the two silver Phillips screws securing the hard drive retaining bracket to the lower case.

first image

Add Note Step 14

  • Slide the Bluetooth board out of its slot next to the hard drive. The Bluetooth board is still connected to the orange hard drive cable, so don't try to remove it entirely from the computer.

first image

Add Note Step 15

  • Lift the hard drive up with one hand and use your other hand to remove the retaining bracket from the side of the hard drive.

Add NoteNotes: Step 13

Flag Reply by lupuss Sep 4 @ 8:51 AM

in my version, the screws are TORX

Add NoteNotes: Step 14

Flag Reply by lupuss Sep 4 @ 8:52 AM

no Bluetooth board here