Installing MacBook Pro 15" Core 2 Duo Model A1211 RAM

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x
  • x 43

Accessing the RAM is easy.

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.

first image

Add Note Edit Step 2 — RAM Shield  ¶ 

  • Remove the three identical Phillips screws from the memory door.

first image

Add Note Edit Step 3  ¶ 

  • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

first image

Add Note Edit Step 4 — RAM  ¶ 

  • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

first image

Add Note Edit Step 5  ¶ 

  • Pull the chip directly out from its connector.

  • If there are two RAM chips installed, repeat the above procedure for the second chip.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Pro 15" Core 2 Duo Model A1211 device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on