first image

Add Note Step 19

  • Pull up the display data cable from along the edge of the optical drive to reveal a silver Phillips screw.

first image

Add Note Step 20

  • Remove the Phillips screw securing the optical drive.

  • The Bluetooth cable may be covering the screw; carefully push it aside before removing the screw.

first image

Add Note Step 21

  • Lift the Bluetooth antenna board from the right side of the optical drive.

Add NoteNotes: Step 20

Flag Reply by adamorth Aug 13 @ 5:57 PM

That screw is covered in cables. You will have to be careful and patient