first image

Add Note Step 52

  • Remove the two Phillips screws securing the hard drive connector to the lower case.

first image

Add Note Step 53

  • Carefully lift the hard drive connector out of the case slightly, and turn it over to reveal the IR sensor connector beneath. Use a spudger to flip up the tiny bar holding the cable in place.

  • Slide the orange IR sensor cable out of its connector, and lift the hard drive connector out of the computer.

first image

Add Note Step 54

  • Lower case remains.

Congratulations!

Share your repair story!

  

To reassemble your device, follow these instructions in reverse order. For more information, check out the MacBook Core Duo device page.

Did you successfully follow this guide?

Notes

There are no notes