Steps 1–2: Battery
Steps 3–4: Memory Cover
Steps 5–12: Upper Case
Steps 13–23: Optical Drive
Steps 24–26: C-Channel
Steps 27–34: Display
Steps 35–39: Front Bezel
Steps 40–43: Clutch Cover
Steps 44–45: Inverter
Steps 46–60: LCD Panel
Related parts
MacBook 13.3" LCD Panel
$119.95 · 89 in stock
MacBook 13.3" Core Duo LCD Assembly
$199.95 · 2 in stock
Related tools
Spudger
$2.95 · 302 in stock
Phillips #00 Screwdriver
$4.95 · 324 in stock
Popular Repair Guides
Step 52
Thread the display data and iSight cable around the right hinge.
Lift the display assembly and its attached cables out of the rear bezel.
Step 53
Turn the LCD panel assembly over so that the screen is face down. You may want to use a cloth on your worksurface to prevent scratching the screen.
Peel up the yellow tape securing the display data and iSight cables to the back of the LCD panel.
You'll need to transfer the tape over to your new display when reassembling the computer.
Step 54
Disconnect the black display data cable from the back of the display.
When reassembling be sure to route these cables correctly or the panel will not mount correctly and the bezel will not fit flush against the casing.
When I worked at an Apple Authorized Repair Center one thing I remember from this step was to make sure to remove this cable straight down because it is easy to bend and damage the connection.