Steps 1–2: Battery
Steps 3–4: Memory Cover
Steps 5–12: Upper Case
Steps 13–23: Optical Drive
Steps 24–26: C-Channel
Steps 27–34: Display
Steps 35–39: Front Bezel
Steps 40–43: Clutch Cover
Steps 44–45: Inverter
Steps 46–60: LCD Panel
Related parts
MacBook 13.3" LCD Panel
$119.95 · 51 in stock
MacBook 13.3" Core Duo LCD Assembly
$199.95 · 1 in stock
Related tools
Phillips #00 Screwdriver
$4.95 · 481 in stock
Spudger
$2.95 · 919 in stock
Popular Repair Guides
Step 49
Remove the Phillips screw securing the display data cable to the right hinge.
Do the same for the inverter cable on the left hinge, if applicable.
Step 50
Remove the 12 identical Phillips screws securing the LCD panel assembly to the rear bezel.
Step 51
Begin to lift the LCD panel assembly out of the computer by lifting up near the top of the display.
Be careful to only hold the LCD panel by the silver metal brackets that surround it.
I found this step unnessasary. Along with removing the left corner.
When re-assembling check to insure the magnet on the left hand side half way down is still in place it should be on the plastic top case cover. When I re-assembled it fell out and my MacBook would not go into sleep mode when the display was closed. I had to pull it apart again to fix.