Installing MacBook Core 2 Duo RAM

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x
  • x 161

Accessing the RAM in this computer is straightforward and requires minimal disassembly.

The Mid 2009 2.13 GHz model is the only A1181 MacBook that uses PC2-6400 RAM.

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to rotate the battery-locking screw 90 degrees clockwise.

first image

Add Note Edit Step 2  ¶ 

  • Lift the battery out of the computer.

first image

Add Note Edit Step 3 — Memory Cover  ¶ 

  • Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.

  • The screws are captive to the metal memory cover so you cannot lose them.

first image

Add Note Edit Step 4  ¶ 

  • Rotate the L-shaped memory cover so it clears the battery compartment opening and lift it up and out of the computer.

first image

Add Note Edit Step 5 — RAM  ¶ 

  • Pull back on the metal lever and slide the RAM chip out from its compartment.

  • Unlike the iBook line, the MacBook has two RAM slots.

  • When installing RAM, be sure to push the chips in firmly or else the computer will not register them.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Core 2 Duo device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on