first image

Add Note Edit Step 4  ¶ 

  • Rotate the L-shaped memory cover so it clears the battery compartment opening and lift it up and out of the computer.

first image

Add Note Edit Step 5 — Upper Case  ¶ 

  • Remove the following 3 screws:

    • One 11 mm Phillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)

    • Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)

  • If the screws stick in the case, you can use a magnetized screwdriver to draw them out.

  • The shorter of the three screws goes in the middle.

first image

Add Note Edit Step 6  ¶ 

  • Remove the following 3 screws from the rear wall of the battery compartment:

    • One 3 mm Phillips #0. (Head: 2.75 mm. dia.)

    • Two 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.)

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 16 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Popular Device Products

750 GB 7200 RPM Seagate SATA Hard Drive Upgrade Kit (New)

$219.95 · 22 in stock

Arctic Silver Thermal Paste

$8.95 · 50+ in stock

MacBook MagSafe DC-In Board

$29.95 · 29 in stock

MacBook Display Inverter

$49.95 · 23 in stock

MacBook 13.3" LCD Panel

$149.95 · 50+ in stock

Notes Add Note Notes are offturn on