Installing MacBook Air Hard Drive

Add Note Introduction

Unpublished

Unpublished

This guide will not appear in search results but can still be viewed by anyone!

Paginated Single Page Steps

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Step 1 — Hard Drive

  • Disconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab.

  • Pull the audio out ribbon cable off the adhesive securing it to the upper case.

  • Use a spudger to pry the audio out ribbon cable connector board off the hard drive bracket.

first image

Add Note Step 2

  • Disconnect the audio out cable from its socket on the port hatch ribbon cable.

first image

Add Note Step 3

  • Use a spudger to pry the hard drive cable connector up off the logic board.

Notes

There are no notes