Installing iPhone 1st Generation Headphone Jack

YOU NEED TO PUT THE OPENER TOOL BETWEEN THE ANTENNA COVER AND THE DOCK CONNECTOR FIRST, THEN YOU WILL HAVE SPACE TO OPEN IT.. MY 2 CENTS

[quote|riversde]YOU NEED TO PUT THE OPENER TOOL BETWEEN THE ANTENNA COVER AND THE DOCK CONNECTOR FIRST, THEN YOU WILL HAVE SPACE TO OPEN IT.. MY 2 CENTS[/quote]

Very hard to remove and the plastic is very fragile

Take care when removing

[quote|miguelvillela]Very hard to remove and the plastic is very fragile Take care when removing[/quote]

When you get stuck follow this guy guide

http://www.youtube.com/watch?v=sYHnr89HM...

[quote|miguelb]When you get stuck follow this guy guide http://www.youtube.com/watch?v=sYHnr89HMPo&feature=related[/quote]

Great Guide.

My dad banged his iPhone in a table after arguing with someone and got the aluminum cover next to the volume control bent in such a way as it got the volume control stuck in the max position. I used this guide to remove all parts out of the way so I can get the shape of that region and corrected it the "Han Solo" Way. It was an excellent opportunity to get the phone cleaned up as well

The biggest problem I had was screwing some of the screws back. The screwdriver that I had was not magnetized, so I used a little bit of superglue to bind the screw and the screwdriver until I had it screwed tightly.

The second biggest problem I had was that I lost a screw twice, but was lucky enough to find it quickly on the floor next to me.

I am very happy as I waited more than a month to get the confidence to get this iPhone repaired.

[quote|lantinian]Great Guide. My dad banged his iPhone in a table after arguing with someone and got the aluminum cover next to the volume control bent in such a way as it got the volume control stuck in the max position. I used this guide to remove all parts out of the way so I can get the shape of that region and corrected it the "Han Solo" Way. It was an excellent opportunity to get the phone cleaned up as well The biggest problem I had was screwing some of the screws back. The screwdriver that I had was not magnetized, so I used a little bit of superglue to bind the screw and the screwdriver until I had it screwed tightly. The second biggest problem I had was that I lost a screw twice, but was lucky enough to find it quickly on the floor next to me. I am very happy as I waited more than a month to get the confidence to get this iPhone repaired.[/quote]

how do i know what part is in my phone? There are 2...

[quote|Ivanfrost]how do i know what part is in my phone? There are 2...[/quote]