Installing iPhone 1st Generation Display Assembly

  • Author: iRobot
  • Difficulty: Very difficult
  • Add Note x
  • x 83

Cracked or faulty display? Replace it.

Sections
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — SIM Card  ¶ 

  • Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.

  • Press down on the paper clip until the SIM card tray pops out.

first image

Add Note Edit Step 2  ¶ 

  • Grasp the SIM card tray and slide it out of the iPhone.

first image

Add Note Edit Step 3 — Antenna Cover  ¶ 

  • This image shows the two tabs and two catches located on the underside of the antenna cover. The two tabs at the top of the image must be pushed towards the black cover to release them.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Metal Spudger

$2.95 · 50+ in stock

Plastic Opening Tools

$2.95 · 50+ in stock

SIM Card Eject Tool

$2.95 · 50+ in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 47 in stock

Anti-Static Wrist Strap

$7.95 · 22 in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Popular Device Products

iPhone Gen 1 Antenna Cover

$14.95 · 17 in stock

iPhone Gen 1 Replacement Battery

$14.95 · 18 in stock

SIM Card Eject Tool

$2.95 · 50+ in stock

iPad USB 10W AC Charger

$19.95 · 7 in stock

Notes Add Note Notes are offturn on