Installing iMac G5 20" Model A1145 Hard Drive Replacement

Add Note Introduction

Upgrade your hard drive for more storage space.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Access Door

  • Orient the iMac face-side down on a table with the bottom edge facing yourself.

  • Remove the two Phillips screws securing the access door to the bottom grille of your iMac.

  • The screws are captive in the access door.

first image

Add Note Step 2

  • Remove the access door.

first image

Add Note Step 3 — Front Bezel

  • Remove the three T8 Torx screws securing the front bezel to the rear case along the lower edge of the iMac.

Notes

There are no notes