Installing iBook G4 14" 1.42 GHz Logic Board

Add Note Introduction

The motherboard includes all ports except the DC-In board.

Parts relevant to this guide

Paginated Single Page Steps

first image
thumb image 1
thumb image 2

Add Note Step 1 — Battery

  • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — Keyboard

  • Pull the keyboard release tabs (shown in yellow) toward you and lift up on the keyboard until it pops free.

  • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw (shown in orange) 180 degrees in either direction and try again.

  • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

first image

Add Note Step 3

  • Remove the four silver Phillips screws that secure the RAM shield.

Notes

There are no notes