Installing PowerBook G4 Titanium Onyx Lower Case

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x

The bottom case slides off easily after removing a few T8 Torx screws.

Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Lower Case  ¶ 

  • Turn the G4 over.

  • Remove the eight T8 Torx screws from the lower case.

first image

Add Note Edit Step 2  ¶ 

  • Using your thumbs, slide the lower case away from you.

  • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

first image

Add Note Edit Step 3  ¶ 

  • Your laptop should look approximately like this.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the PowerBook G4 Titanium Onyx device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on