Installing PowerBook G4 Titanium Onyx Display

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x
  • x 7

Change out the entire display assembly, including the hinges and casing. This installation is MUCH easier than replacing just the LCD panel.

Sections
first image

Add Note Edit Step 1 — Keyboard  ¶ 

  • Remove the battery.

  • Turn the keyboard locking screw so that it is parallel to the space bar.

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

first image

Add Note Edit Step 2  ¶ 

  • Rest the keyboard face down on the trackpad area.

  • Disconnect the keyboard connector from the logic board.

first image

Add Note Edit Step 3  ¶ 

  • Your laptop should look approximately like this.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 47 in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

5mm Nut Driver

$9.95 · 12 in stock

Related Products

G4 Titanium Onyx Display Assembly

$599.95 · 3 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on