Installing PowerBook G4 Titanium Mercury Inverter Board

Add Note Introduction

The inverter powers the LCD backlight and is not a difficult part to replace.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Keyboard

  • Remove the battery.

  • Turn the keyboard locking screw so that it is parallel to the space bar.

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

first image

Add Note Step 2

  • Rest the keyboard face down on the trackpad area.

  • Disconnect the keyboard connector from the logic board.

first image

Add Note Step 3

  • Your laptop should look approximately like this.

Notes

There are no notes