Installing PowerBook G4 Titanium DVI Inverter

Add Note Introduction

The inverter powers the LCD backlight and is not a difficult part to replace.

Tools used in this guide
Parts relevant to this guide

Paginated Single Page Steps

first image
thumb image 1
thumb image 2

Add Note Step 1 — Battery

  • Locate the battery release tab on the underside of the G4.

  • Slide the battery release tab to the left and lift the battery out of the computer.

first image

Add Note Step 2 — Lower Case

  • Remove the seven T8 Torx screws from the lower case.

first image

Add Note Step 3

  • Using your thumbs, slide the lower case away from you.

  • The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

Notes

There are no notes