Installing PowerBook G4 Titanium DVI Airport Card

Add Note Introduction

Install an original Airport 802.11b card internally.

Tools used in this guide
Parts relevant to this guide

Paginated Single Page Steps

first image
thumb image 1
thumb image 2

Add Note Step 1 — Battery

  • Locate the battery release tab on the underside of the G4.

  • Slide the battery release tab to the left and lift the battery out of the computer.

first image

Add Note Step 2 — Lower Case

  • Remove the seven T8 Torx screws from the lower case.

first image

Add Note Step 3

  • Using your thumbs, slide the lower case away from you.

  • The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

Notes

There are no notes