Installing PowerBook G4 Aluminum 17" 1-1.67 GHz PRAM Battery & USB Board

Add Note Introduction

Is your clock resetting itself or USB on the right side not working? Replace it!

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Orient the computer so that the side with the line of screws on it is away from you.

  • Use your thumbs to push both battery release tabs away so that the edge of the battery lifts up.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — Upper Case

  • Remove the three identical Phillips screws from the memory door.

first image

Add Note Step 3

  • Lift the memory door up enough so that you can get a grip on it, and slide it toward you, pulling it away from the casing.

Notes

There are no notes